{"id":2527,"date":"2015-06-30T15:56:49","date_gmt":"2015-06-30T13:56:49","guid":{"rendered":"http:\/\/www.tonmeister.ca\/wordpress\/?p=2527"},"modified":"2018-05-29T07:58:44","modified_gmt":"2018-05-29T05:58:44","slug":"bo-tech-what-is-beam-width-control","status":"publish","type":"post","link":"http:\/\/www.tonmeister.ca\/wordpress\/2015\/06\/30\/bo-tech-what-is-beam-width-control\/","title":{"rendered":"B&O Tech: What is “Beam Width Control”?"},"content":{"rendered":"
\n
\n
\n

#34 in\u00a0a series of articles<\/a>\u00a0about the technology behind\u00a0Bang & Olufsen<\/a>\u00a0loudspeakers<\/strong><\/p>\n

 <\/p>\n

A little background:
\nDistance Perception in “Real Life”<\/h2>\n

Go to the middle of a snow-covered frozen lake with a loudspeaker, a chair, and a friend. Sit on the chair, close your eyes and get your friend to place the loudspeaker some distance from you. Keep your eyes closed, play some sounds out of the loudspeaker and try to estimate how far away it is. You will be wrong (unless you\u2019re VERY lucky). Why? It\u2019s because, in real life with real sources in real spaces, distance information (in other words, the information that tells you how far away a sound source is) comes mainly from the relationship between the direct sound and the early reflections that come at you horizontally. If you get the direct sound only, then you get no distance information. Add the early reflections and you can very easily tell how far away it is. If you’re interested in digging into this on a more geeky level, this report<\/a>\u00a0is a good starting point.<\/p>\n

\n

A little more background:
\nDistance perception in a recording<\/strong><\/h2>\n
Recording engineers use this information as a trick to simulate differences in apparent distance to sound sources in a stereo recording by\u00a0playing with\u00a0the so-called \u201cdry-wet\u201d ratio \u2013 in other words, the relative levels of the direct sound and the reverb. I first learned this in the little booklet that came with my first piece of recording gear \u2013 an Alesis Microverb (1st generation… It was a while ago…). To be honest \u2013 this is a bit of an over-simplification, but it’s good enough to work (for example, listen to the reverberation on Grover’s voice change as he moves from “near” to “far” in this video<\/a>). The people at\u00a0another reverb unit manufacturer<\/a>\u00a0know that the truth requires a little more details. For example, their\u00a0flagship reverb unit<\/a>\u00a0uses correctly-positioned and correctly-delayed early reflections to deliver a believable room size and sound source location in that room.<\/div>\n
<\/div>\n<\/div>\n
\n

Recording Studios vs. Living Rooms<\/h2>\n

When a recording engineer makes a recording in a well-designed studio, he or she is sitting not only in a carefully-designed acoustical space, but a very special area within that space. In many recording studios, there is an area behind the mixing console where there are no (or at least almost<\/em> no)\u00a0reflections from the sidewalls . This is accomplished either by putting acoustically absorptive materials on the walls to soak up the sound so it cannot reflect (as shown in Figure 1), or to angle the walls so that the reflections are directed away from the listening position (as shown in Figure\u00a02).<\/p>\n

\"Figure<\/a>
Figure 1: A typical floorplan for a recording studio that was built inside an existing room. The large rectangle is the recording console. The blue triangles are acoustically absorptive materials.<\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

 <\/p>\n

\"Figure<\/a>
Figure 2: A typical floorplan for a recording studio that was designed for the purpose. The large rectangle is the recording console. Note that the side walls are angled to reflect energy away from the listening position.<\/figcaption><\/figure>\n

Both of these are significantly different from what happens in a typical domestic listening room (in other words, your living room) where the walls on either side of the listening position are usually\u00a0\u00a0acoustically reflective, as is shown in Figure 3.<\/p>\n

\"Figure<\/a>
Figure 3: A typical floorplan for a living room used as a listening room.<\/figcaption><\/figure>\n

 <\/p>\n

\n
\n
\n
\n

In order to get the same acoustical behaviour at the listening position in your living room that the recording engineer had in the studio, we will have to reduce the amount of energy that is reflected off the side walls. If we do not want to change the room, one way to do this is to change the behaviour of the loudspeaker by focusing the beam of sound so that it stays directed at the listening position, but it sends less sound to the sides, towards the walls, as is shown in Figure 4.<\/p>\n

\"Figure<\/a>
Figure 4: A representation of a system using loudspeakers that send less energy towards the sidewalls. Note that there are still sidewall reflections – they’re just less noticeable.<\/figcaption><\/figure>\n

So, if you\u00a0could reduce the width of\u00a0the beam of sound directed out the front of the loudspeaker to be narrower to reduce the level of sidewall reflections, you would get a more accurate representation of the sound the recording engineer heard when the recording was made. This is because, although you still have sidewalls that are reflective, there is less energy going towards them that will reflect to the listening position.<\/p>\n<\/div>\n

\n
\n
\n
\n

However, if you\u2019re sharing your music with friends or family, depending on where people are sitting, the beam may be too<\/em> narrow to ensure that everyone has the same experience. In\u00a0this case, it may be desirable to make the loudspeaker’s\u00a0sound beam wider.\u00a0Of course, this can be extended to its extreme where the loudspeaker’s\u00a0beam width is extended to radiate sound in all directions equally. This may be a good setting for cases where you have many people moving around the listening space, as may be the case at a party, for example.<\/p>\n

\n
\n
\n
\n

For the past 5 or 6\u00a0years, we in the acoustics department at Bang & Olufsen have been working on a loudspeaker technology that allows us to change this radiation pattern using a system we call\u00a0Beam Width Control<\/strong>. Using lots of DSP power, racks of amplifiers, and loudspeaker drivers, we are able to not only create the beam width that we want (or switch on-the-fly between different beam widths), but we can do so over a wide frequency range. This allows us to listen to the results, and design the directivity pattern of a loudspeaker, just as we currently design its timbral characteristics by sculpting\u00a0its magnitude response. This means that we can not only decide how a loudspeaker “sounds” – but how it represents the spatial properties of the recording.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

 <\/p>\n

What does Beam Width Control\u00a0do?<\/h2>\n

Let’s start by taking a simple recording – Susanne Vega singing “Tom’s Diner”. This is a song that consists only of a fairly dryly-recorded\u00a0voice without any accompanying instruments. If you play this tune over “normal” multi-way loudspeakers, the distance to the voice can (depending on the specifics of the loudspeakers and the listening room’s reflective surfaces) sound a little odd.\u00a0\u00a0As I\u00a0discussed in more detail in this article<\/a>, different beam widths (or, if you’re a little geeky – “differences in directivity”) at different frequency bands can cause artefacts\u00a0like Vega’s “t’s” and “‘s’s” appearing to be closer to you than her vowel sounds, as I have tried to represent in Figure 5.<\/p>\n

\"Figure<\/a>
Figure 5: A spatial map representing the location of the voice in Suzanne Vega’s recording of Tom’s Diner. Beam Width Control = off. Note that the actual experience is that some frequency bands in her voice appear closer than others. This is due to the fact that the loudspeakers have different directivities at different frequencies.<\/figcaption><\/figure>\n

 <\/p>\n

\"Figure<\/a>
Figure 6: The directivity of the system as a “normal” multi-way loudspeaker. 3 dB per contour to -12 dB relative to on-axis.<\/figcaption><\/figure>\n

If you then switch to a loudspeaker with a narrow beam width\u00a0(such as that shown in the directivity plot in Figure 7 – the beam width is the vertical thickness of the shape in the plot – note that it’s wide in the low frequencies and narrowest at 10,000 Hz), you don’t get much energy reflected off the side walls of the listening room. You should also notice that the contour lines are almost\u00a0parallel, which means that the same beam width doesn’t change as much with frequency.<\/p>\n

\"Figure<\/a>
Figure 7: The directivity of the system in “narrow” beam width. 3 dB per contour to -12 dB relative to on-axis.<\/figcaption><\/figure>\n

Since there is very little reflected energy in the recording itself, the result is that the voice seems to float in space as a pinpoint, roughly half-way between the listening position and the loudspeakers – much as was the case of the sound of your friend on the snow-covered lake.\u00a0In\u00a0addition, as you can see in Figure 7, the beam width of the loudspeaker’s radiation is almost the same at all frequencies – which means that, not only does Vega’s voice float in a location between you and the loudspeakers, but all frequency bands of her voice appear to be the same distance from you. This is represented in Figure 8.<\/p>\n

\"Figure<\/a>
Figure 8: A spatial map representing the location of the voice in Suzanne Vega’s recording of Tom’s Diner. Beam Width = narrow.<\/figcaption><\/figure>\n

If we then switch to a completely different beam width that sends sound in all directions, making a kind of omnidirectional loudspeaker (with a directivity response as is shown in Figure 9), then there are at least three\u00a0significant changes in the perceived sound. (If you’re familiar with such plots, you’ll be able to see the “lobing” and diffraction caused by various things, including the hard corners on our MDF loudspeaker enclosures. See this article<\/a> for more information about this little issue…\u00a0)<\/p>\n

\"Figure<\/a>
Figure 9: The directivity of the system in “omni” beam width. 3 dB per contour to -12 dB relative to on-axis.<\/figcaption><\/figure>\n

The first big change is that the timbre of the voice is considerably different – particularly\u00a0in the mid-range (although you could easily argue that this particular recording only has mid-range…). This is caused by the “addition” of reflections from the listening room’s walls at the listening position (since we’re now sending more energy towards the room boundaries). The second change is in the apparent distance to the voice. It now appears to be floating at a distance that is the same as\u00a0the distance to\u00a0the loudspeakers from the listening position. (In other words, she moved away from you…). The third change is in the apparent width of the phantom image – it becomes much wider and “fuzzier” – like a slightly wide cloud floating between the loudspeakers (instead of a pin-point location). The total result is represented in Figure 10, below.<\/p>\n

\"Figure<\/a>
Figure 10: A spatial map representing the location of the voice in Suzanne Vega’s recording of Tom’s Diner. Beam Width = omni.<\/figcaption><\/figure>\n

 <\/p>\n

All three of these artefacts are the result of the increased energy from the wall reflections.<\/p>\n

Of course, we don’t need to go from a very narrow to an omnidirectional beam width. We could find a “middle ground” – similar to the 180\u00ba beam width of BeoLab 5<\/a> and call that “wide”. The result of this is shown in Figures 11 and 12, with a measurement of the BeoLab 5’s directivity shown for comparison in Figure 13.<\/p>\n

\"Figure<\/a>
Figure 11: The directivity of the system in “wide” beam width. 3 dB per contour to -12 dB relative to on-axis.<\/figcaption><\/figure>\n

 <\/p>\n

\"Figure<\/a>
Figure 12: A spatial map representing the location of the voice in Suzanne Vega’s recording of Tom’s Diner. Beam Width = wide.<\/figcaption><\/figure>\n

 <\/p>\n

\"Figure<\/a>
Figure 13: The directivity of a BeoLab 5.<\/figcaption><\/figure>\n

If we do the same comparison using a more complex mix (say, Jennifer Warnes singing “Bird on a Wire” for example) the difference in the spatial representation is something like that which is shown in Figures 14 and 15. (Compare these to the map shown in this article<\/a>.) Please note that these are merely an “artist’s rendition” of the effect and should not be taken as precise representations of the perceived spatial representation of the mixes. Actual results will certainly vary from listener to listener, room to room, and with changes in loudspeaker placement relative to room boundaries.<\/p>\n

 <\/p>\n

\"Figure<\/a>
Figure 14: A spatial map representing the locations of some of the sound sources in Jennifer Warnes’s recording of Bird on a Wire. Beam Width = narrow.<\/figcaption><\/figure>\n

 <\/p>\n

\"Figure<\/a>
Figure 15: A spatial map representing the locations of some of the sound sources in Jennifer Warnes’s recording of Bird on a Wire. Beam Width = wide.<\/figcaption><\/figure>\n

 <\/p>\n

Of course, everything I’ve said above assumes that you’re sitting in the “sweet spot” – a location equidistant to the two loudspeakers at which both loudspeakers are aimed. If you’re not, then the perceived differences between the “narrow” and “omni” beam widths will be very different… This is because you’re sitting outside the narrow beam, so, for starters, the direct sound from the loudspeakers in omni mode will be louder than when they’re in narrow mode. In an extreme case, if you’re in “narrow” mode, with\u00a0the loudspeaker pointing at the wall instead of the listening position, then the reflection will be louder than the direct sound – but now I’m getting pedantic.<\/p>\n

 <\/p>\n

Wrapping up…<\/h2>\n

The idea here is that we’re experimenting on building a loudspeaker that can deliver a narrow beam width so that, if you’re like me – the kind of person who has one chair and no friends, and you know what a “stereo sweet spot” is, then you can sit in that chair and hear the same spatial representation that the recording engineer heard in the recording studio (without having to make changes to your living room’s acoustical treatment). However, if you do happen to have some friends visiting, you have the option of switching over to a wider beam width so that everyone shares a more similar experience. It won’t sound as good (whatever that might mean to you…) in the sweet spot, but it might sound better if you’re somewhere else. Similarly, if you take that to an extreme and have a LOT of friends over, you can use the “omni” beam width and get a more\u00a0even distribution of background music throughout the room.<\/p>\n

 <\/p>\n

For more information on Beam Width Control<\/p>\n

Shark Fins and the birth of Beam Width Control<\/a><\/p>\n

Beam Width Control \u2013 A Primer<\/a><\/p>\n

 <\/p>\n

Post-script<\/h2>\n

For an outsider’s view, please see the following…<\/p>\n

“Ny lydteknikk fra Bang & Olufsen<\/a>” – Lyd & Bilde (Norway)<\/p>\n

Stereophile magazine<\/a> (October 2015, Print edition) did an article on their experiences hearing the prototypes as well.<\/p>\n

“BeoLab 90: B&O laver banebrydende h\u00f8jttaler<\/a>”\u00a0– Lyd & Bilde (Norway)<\/p>\n","protected":false},"excerpt":{"rendered":"

#34 in\u00a0a series of articles\u00a0about the technology behind\u00a0Bang & Olufsen\u00a0loudspeakers   A little background: Distance Perception in “Real Life” Go to the middle of a snow-covered frozen lake with a loudspeaker, a chair, and a friend. Sit on the chair, close your eyes and get your friend to place the loudspeaker some distance from you. […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[33,4,32,5,6],"tags":[],"class_list":["post-2527","post","type-post","status-publish","format-standard","hentry","category-acoustics","category-audio","category-bang-olufsen","category-loudspeakers","category-recordings"],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p48hIM-EL","_links":{"self":[{"href":"http:\/\/www.tonmeister.ca\/wordpress\/wp-json\/wp\/v2\/posts\/2527","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.tonmeister.ca\/wordpress\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.tonmeister.ca\/wordpress\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.tonmeister.ca\/wordpress\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.tonmeister.ca\/wordpress\/wp-json\/wp\/v2\/comments?post=2527"}],"version-history":[{"count":29,"href":"http:\/\/www.tonmeister.ca\/wordpress\/wp-json\/wp\/v2\/posts\/2527\/revisions"}],"predecessor-version":[{"id":4746,"href":"http:\/\/www.tonmeister.ca\/wordpress\/wp-json\/wp\/v2\/posts\/2527\/revisions\/4746"}],"wp:attachment":[{"href":"http:\/\/www.tonmeister.ca\/wordpress\/wp-json\/wp\/v2\/media?parent=2527"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.tonmeister.ca\/wordpress\/wp-json\/wp\/v2\/categories?post=2527"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.tonmeister.ca\/wordpress\/wp-json\/wp\/v2\/tags?post=2527"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}